adbe
Mar 26, 10:42 PM
Agreed!
What am I supposed to do when my contract ends this July!?
You do realize you don't have to renew the contract right? AT&T will be more than happy to keep taking your money until such time as you feel ready to sign a new one.
What am I supposed to do when my contract ends this July!?
You do realize you don't have to renew the contract right? AT&T will be more than happy to keep taking your money until such time as you feel ready to sign a new one.
NebulaClash
Apr 25, 09:33 AM
Steve needs to provide a better answer because this one makes him look like a liar.
How so? Everything he said fits the facts as we know them. There is NO evidence that this information gets transmitted to ANYONE, and believe me people are looking hard to prove otherwise. So this makes Steve look like he's telling the truth.
How so? Everything he said fits the facts as we know them. There is NO evidence that this information gets transmitted to ANYONE, and believe me people are looking hard to prove otherwise. So this makes Steve look like he's telling the truth.
Don't panic
Apr 11, 07:06 AM
are we still debating over this?
if we stay to basic math, it depends on how you read the / sign
if it only refers to the immediately following expression then you'd have
(48/2)*(9+3)=288
if it refers to everything following, then you'd have
48/[2*(9+3)]=2
it is poorly written (or more likely purposely ambiguously written), but in such cases the left-to-right rule should prevail, making it 288. on the other hand, square brackets are way cooler than round brackets, making 2 the cool answer.
if we move to postadvanced math however, it is clear that "/" separates two expressions: 48 and 2(9+3);
- as someone already mentioned above, absence of the operator implies multiplication, so 48=4*8. now, everyone knows that by the reciprocal inversity properties multiplication is the opposite of division, therefore 4 multiplied by 8 must be equal to 8 divided by 4, which is most obviously 2 (on the left part of the expression);
- now to the right part. this is easy. Ignoring the round bracket (which as mentioned are uncool), you have 2*9+3, which gives you a very straightforward 21;
- so now we have 2/21, which as demonstrated above is equal to 21*2, which is (i hope no one disagrees on this) 42.
so please now stop with your earthlingy bickering: the answer is always 42. :rolleyes::rolleyes::rolleyes:
if we stay to basic math, it depends on how you read the / sign
if it only refers to the immediately following expression then you'd have
(48/2)*(9+3)=288
if it refers to everything following, then you'd have
48/[2*(9+3)]=2
it is poorly written (or more likely purposely ambiguously written), but in such cases the left-to-right rule should prevail, making it 288. on the other hand, square brackets are way cooler than round brackets, making 2 the cool answer.
if we move to postadvanced math however, it is clear that "/" separates two expressions: 48 and 2(9+3);
- as someone already mentioned above, absence of the operator implies multiplication, so 48=4*8. now, everyone knows that by the reciprocal inversity properties multiplication is the opposite of division, therefore 4 multiplied by 8 must be equal to 8 divided by 4, which is most obviously 2 (on the left part of the expression);
- now to the right part. this is easy. Ignoring the round bracket (which as mentioned are uncool), you have 2*9+3, which gives you a very straightforward 21;
- so now we have 2/21, which as demonstrated above is equal to 21*2, which is (i hope no one disagrees on this) 42.
so please now stop with your earthlingy bickering: the answer is always 42. :rolleyes::rolleyes::rolleyes:
JD914
Mar 26, 11:38 PM
I'm going to laugh at all those who say iOS 5 wont be delayed when it actually will be :rolleyes:
zorinlynx
May 6, 08:03 AM
Why would they do this? Intel processors give among the best performance per watt on the market, and have power saving modes so advanced that you can get 8-9 hours of regular usage out of a Macbook Pro that is also one of the fastest laptops on the market when pushed hard.
I hate these unfounded rumors; they make people hesitant to invest in a platform. If Apple changes processors in the Mac it will likely be to AMD CPUs, which would be just fine as it would barely require software changes at all.
Even a low end Intel x86 CPU... hell, even an Atom trounces the ARM processors. They're different architectures meant for different purposes.
I hate these unfounded rumors; they make people hesitant to invest in a platform. If Apple changes processors in the Mac it will likely be to AMD CPUs, which would be just fine as it would barely require software changes at all.
Even a low end Intel x86 CPU... hell, even an Atom trounces the ARM processors. They're different architectures meant for different purposes.
Amdahl
Nov 2, 09:23 PM
We (the Mac community) should not let the security industry get a toe hold in OSX.
Then get Apple to release security updates for longer than 24 months.
The availability of these products is good news for anybody who is getting tired of paying Steve.
Then get Apple to release security updates for longer than 24 months.
The availability of these products is good news for anybody who is getting tired of paying Steve.
-aggie-
May 4, 09:00 PM
Can we get an explanation from the gods, since this is the first game in this format?
Jorojr
Apr 18, 03:18 PM
I did not know that TSMC produces LCD panels, RAM, SSD drives or flash memory. If Samsung stops supplying those to Apple, Apple is dead.
Apple would probably find other suppliers of those components, so I doubt not having Samsung as a supplier would kill Apple.
On the other hand, if they have to go to multiple manufacturers for the components instead of one big supplier (like Samsung), I would expect them to pay higher costs for parts. This would result in the costs being passed down the consumer.
Apple would probably find other suppliers of those components, so I doubt not having Samsung as a supplier would kill Apple.
On the other hand, if they have to go to multiple manufacturers for the components instead of one big supplier (like Samsung), I would expect them to pay higher costs for parts. This would result in the costs being passed down the consumer.
HecubusPro
Sep 15, 09:03 PM
Btw, how many days does it take for the new MBPs to arrive in the Apple showrooms from the time they are announced?
Ideally, Apple likes to have them in stores, ready to buy as soon as they announce them. But that's rarely the case. Sometimes they get them in right away, sometimes they don't.
Ideally, Apple likes to have them in stores, ready to buy as soon as they announce them. But that's rarely the case. Sometimes they get them in right away, sometimes they don't.
bryanc
Sep 11, 11:01 AM
10 hours? Luxury. I dream of being able to download 2GB in 10 hours.
It'll take me over 4 days.
Hrumpf... When I was a lad, we used to have to chisel the ones and zeros into a stone tablet with our fingernails, carry them to and from the server 5 miles through a snowstorm (uphill, both ways), only to have our father delete them, kill us outright, and dance about on our graves singin' hallelujah!
Cheers
It'll take me over 4 days.
Hrumpf... When I was a lad, we used to have to chisel the ones and zeros into a stone tablet with our fingernails, carry them to and from the server 5 miles through a snowstorm (uphill, both ways), only to have our father delete them, kill us outright, and dance about on our graves singin' hallelujah!
Cheers
tipdrill407
Aug 7, 10:03 PM
Uh, that's the point: you shouldn't have to 'pay more' - it should be standard, and shouldn't raise the price-point, if other manufacturers can do it.
I don't get the apologists who defend every questionable component from Apple by saying 'well, I don't want to pay extra in the base price' (for a reasonable amount of RAM or for a decent videocard) - demand more from Apple.
Ask why you can't have a $2500 flagship desktop with a graphics card that didn't cost Apple $40, why Apple can't eat the extra $45 to offer their consumer items with a usable amount of RAM standard.
The base model offers more than enough features for a pro to work blazingly fast. The graphics card is adequate for A LOT of things, except maybe hardcore gaming. But again Apple never intended the Mac Pro to be used for shooting ppl.
I don't get the apologists who defend every questionable component from Apple by saying 'well, I don't want to pay extra in the base price' (for a reasonable amount of RAM or for a decent videocard) - demand more from Apple.
Ask why you can't have a $2500 flagship desktop with a graphics card that didn't cost Apple $40, why Apple can't eat the extra $45 to offer their consumer items with a usable amount of RAM standard.
The base model offers more than enough features for a pro to work blazingly fast. The graphics card is adequate for A LOT of things, except maybe hardcore gaming. But again Apple never intended the Mac Pro to be used for shooting ppl.
ptaylor874
Nov 3, 09:31 AM
I just wish the way it was mounted was better, not just glue.
Ummm... It's not just glue. It uses the same suction mount as their other units. I think there is an adhesive disk you can use as well. (Not sure if you stick that to where you want to me able to mount it with suction or exactly how that works.)
I've used a similar type of suction mount with Griffin's Window Seat. It's not just a simple suction cup. You place it where you want to put it, then turn another part to increase the suction. It sticks great to glass, be it the windshield, a side window, or the sunroof (for kids to watch in the back seat), for days at a time. The Window Seat isn't the best implementation of it - I understand that TomTom's is better (easier to attach and detach).
Ummm... It's not just glue. It uses the same suction mount as their other units. I think there is an adhesive disk you can use as well. (Not sure if you stick that to where you want to me able to mount it with suction or exactly how that works.)
I've used a similar type of suction mount with Griffin's Window Seat. It's not just a simple suction cup. You place it where you want to put it, then turn another part to increase the suction. It sticks great to glass, be it the windshield, a side window, or the sunroof (for kids to watch in the back seat), for days at a time. The Window Seat isn't the best implementation of it - I understand that TomTom's is better (easier to attach and detach).
wclyffe
Jan 5, 01:15 PM
BUT i'm curious whether the satnav apps are waiting on the mount's fix or taking first availalble? ... i would hope they'd wait on mount since ultimately it should have more precision since it's called 'enhanced' GPS, but how can you tell for sure?
one thing i've tried is to remove the iPhone from the mount after navigating and see if it disrupts the GPS signal w/in the satnav app ... i would expect there to be a switch over to internal GPS and see a small disruption ... but i'm not getting a disrupted signal ... can't be sure one way or the other
Here's what I've noticed in just one day of use. I'm using Navigon and I did download the TomTom Free App to stop the message from appearing each time. With my 3Gs docked in the car kit, I get the my directions locked in about 5 seconds from when I hit the "Start Navigation" button. I also tried an experiment in my garage, where my phone was unable to get the GPS signal, but docked I had a route in motion in under 5 seconds. Still experimenting.....
one thing i've tried is to remove the iPhone from the mount after navigating and see if it disrupts the GPS signal w/in the satnav app ... i would expect there to be a switch over to internal GPS and see a small disruption ... but i'm not getting a disrupted signal ... can't be sure one way or the other
Here's what I've noticed in just one day of use. I'm using Navigon and I did download the TomTom Free App to stop the message from appearing each time. With my 3Gs docked in the car kit, I get the my directions locked in about 5 seconds from when I hit the "Start Navigation" button. I also tried an experiment in my garage, where my phone was unable to get the GPS signal, but docked I had a route in motion in under 5 seconds. Still experimenting.....
decimortis
Apr 25, 08:59 AM
It's a non-issue.
Sent from your iPhone.
Sent from your iPhone.
aliensporebomb
Apr 25, 11:46 AM
If the Android phones are being tracked at every minute, then why couldn't they find my friends' phone that was stolen out of her desk at her workplace?
Digitalclips
May 6, 05:40 AM
My bet is they have BOTH on board.
Tomorrow
May 3, 12:59 PM
SI is superior in conversions only
Imperial is superior as I actually have a feel for the numbers
It's also easier in calculations - each unit is a derivative of the seven base units, each with a conversion factor of 1.
Yes, let's not change it because YOU actually have a feel for the numbers.
As for having a feel for the numbers, he's not alone. I have nearly 20 years of professional experience using Imperial units as a mechanical engineer, as does every mechanical engineer in the U.S. Switching systems (or, rather, making it mandatory) will require all of these engineers to re-learn the formulae they've known and used for decades. That's the equivalent of millions of man-years of engineering experience down the drain. That isn't progress, no matter how much you might want want to believe it is.
We need to switch to the metric system, what we have now is ****ing crazy when looking at the rest of the world...this is coming from a bio major who has to deal with SI units daily
SI != metric.
I deal with both daily - our electrical system (Watts, Amperes, Volts, Ohms, etc.) are all metric and SI. Using Imperial units doesn't make understanding those SI units any harder.
For the love of your education system, do make the switch! I'm an engineering student from Canada. So I have to learn both imperial and SI. Imperial is such a pain in the ass.
I was an engineering student in the U.S., and I learned to use both systems - and yes, calculations using SI units were simpler. But the reality is that mechanical engineers here do not measure refrigeration in Watts, they use Btuh or tons of refrigeration. We don't use degrees Celsius, we use degrees Fahrenheit. We don't measure airflow in liters per second (which isn't even an SI unit; the proper convention would be cubic meters per second), we use cubic feet per minute. And as such, that's the system I've grown comfortable with as a professional.
Really, most opinions I see in the US to keep the imperial system is because you're not accustomed to it.
Which translates to an incredible cost of switching, and a near-certainty of an avalanche of errors.
...the difference between 37 and 38 degrees Celsius is 1.8 degrees Fahrenheit, hardly a noticeable difference when it comes to weather forecasts.
You'd make a great point if weather forecasts were all we used temperature measurements for.
For chilled water, a 12 degree (F) temperature differential equates to 2 gpm per ton of refrigeration. Every mechanical engineer knows that. Force him to use SI units, and the game changes completely; calculations that could once be done in your head now require a calculator. You would achieve the opposite effect.
I'm not so sure. If a recipe calls for 2 tablespoons, is it not just as easy to measure out 30ml?
Measuring or counting out two is always easier than measuring or counting out thirty.
Are there really any benefits to the Customary scale, or do we just perceive benefits because it's what we're used to?
I don't know that there are benefits to using customary units; but there are indeed benefits to not switching units. Not the same thing.
Metric is just easier to learn. Period.
That's one opinion. Period.
If it were so damn easy, everyone would know it, now, wouldn't they?
Imperial is superior as I actually have a feel for the numbers
It's also easier in calculations - each unit is a derivative of the seven base units, each with a conversion factor of 1.
Yes, let's not change it because YOU actually have a feel for the numbers.
As for having a feel for the numbers, he's not alone. I have nearly 20 years of professional experience using Imperial units as a mechanical engineer, as does every mechanical engineer in the U.S. Switching systems (or, rather, making it mandatory) will require all of these engineers to re-learn the formulae they've known and used for decades. That's the equivalent of millions of man-years of engineering experience down the drain. That isn't progress, no matter how much you might want want to believe it is.
We need to switch to the metric system, what we have now is ****ing crazy when looking at the rest of the world...this is coming from a bio major who has to deal with SI units daily
SI != metric.
I deal with both daily - our electrical system (Watts, Amperes, Volts, Ohms, etc.) are all metric and SI. Using Imperial units doesn't make understanding those SI units any harder.
For the love of your education system, do make the switch! I'm an engineering student from Canada. So I have to learn both imperial and SI. Imperial is such a pain in the ass.
I was an engineering student in the U.S., and I learned to use both systems - and yes, calculations using SI units were simpler. But the reality is that mechanical engineers here do not measure refrigeration in Watts, they use Btuh or tons of refrigeration. We don't use degrees Celsius, we use degrees Fahrenheit. We don't measure airflow in liters per second (which isn't even an SI unit; the proper convention would be cubic meters per second), we use cubic feet per minute. And as such, that's the system I've grown comfortable with as a professional.
Really, most opinions I see in the US to keep the imperial system is because you're not accustomed to it.
Which translates to an incredible cost of switching, and a near-certainty of an avalanche of errors.
...the difference between 37 and 38 degrees Celsius is 1.8 degrees Fahrenheit, hardly a noticeable difference when it comes to weather forecasts.
You'd make a great point if weather forecasts were all we used temperature measurements for.
For chilled water, a 12 degree (F) temperature differential equates to 2 gpm per ton of refrigeration. Every mechanical engineer knows that. Force him to use SI units, and the game changes completely; calculations that could once be done in your head now require a calculator. You would achieve the opposite effect.
I'm not so sure. If a recipe calls for 2 tablespoons, is it not just as easy to measure out 30ml?
Measuring or counting out two is always easier than measuring or counting out thirty.
Are there really any benefits to the Customary scale, or do we just perceive benefits because it's what we're used to?
I don't know that there are benefits to using customary units; but there are indeed benefits to not switching units. Not the same thing.
Metric is just easier to learn. Period.
That's one opinion. Period.
If it were so damn easy, everyone would know it, now, wouldn't they?
amols
Aug 4, 12:27 PM
I think that depends on what Dell, Sony, Toshiba, etc, come out with. No way is Apple going to still be selling a 2.16 Core Duo at it's top end laptop when the PC makers have Core 2 Duo chips.
Apple never was a part of Mhz rat-race. Look at its bestselling Powerbook. How fast was it compared to the then PC laptops. Anyways, WWDC is suppose to be developers conference, so we should speculate more about Leopard and hopefuly MacPros (because they are long due) insted of iPods and MBPs.
Apple never was a part of Mhz rat-race. Look at its bestselling Powerbook. How fast was it compared to the then PC laptops. Anyways, WWDC is suppose to be developers conference, so we should speculate more about Leopard and hopefuly MacPros (because they are long due) insted of iPods and MBPs.
ariza910
Aug 11, 12:43 PM
Yes, actualy all the worlds puppies will die
Everyone waiting on the Core 2 Duo MacBook needs to get a clue.
It's the same folks who were falling over waiting to WWDC to come so they could order their Core 2 Duo MacBooks after the keynote!
Apple IS NOT going to move the MacBook to a Core 2 Duo until they've updated:
1) MacBook Pro
2) iMac
3) Maybe even Mac Mini, since it's been out forever!
The MacBook is barely three months old. It may get a speed bump and/or price cut soon, but won't get a new chip.
All of you saying Apple has to upgrade it to a Core 2 Duo to complete with Dell, HP, etc - why? Why do they HAVE to? Will they explode if they don't? Will the sun stop shining? Will all the world's puppies die?
Of course they'll upgrade it eventually. That doesn't mean it needs to be upgraded as soon as the chips are available. If you look at other PC maker's sites, most of their machines don't even have the Core Duo chips yet; there's no rush.
You can't claim Apple will inevitable act a certain way now that they're on Intel chips; you don't know that. They have no history of using Intel chips. Just because your bright minds think it would be a good idea to move the MB line to the latest and greatest chip whenever a new one is released by Intel because "that's what the other guys are doing," it doesn't mean Apple agrees with you.
What we DO know for a fact is Apple like to differentiate between consumer and pro lines, and Apple has never been one to put the latest chips into the iMac or Mac Mini level machines - and I don't see either of that changing.
Everyone waiting on the Core 2 Duo MacBook needs to get a clue.
It's the same folks who were falling over waiting to WWDC to come so they could order their Core 2 Duo MacBooks after the keynote!
Apple IS NOT going to move the MacBook to a Core 2 Duo until they've updated:
1) MacBook Pro
2) iMac
3) Maybe even Mac Mini, since it's been out forever!
The MacBook is barely three months old. It may get a speed bump and/or price cut soon, but won't get a new chip.
All of you saying Apple has to upgrade it to a Core 2 Duo to complete with Dell, HP, etc - why? Why do they HAVE to? Will they explode if they don't? Will the sun stop shining? Will all the world's puppies die?
Of course they'll upgrade it eventually. That doesn't mean it needs to be upgraded as soon as the chips are available. If you look at other PC maker's sites, most of their machines don't even have the Core Duo chips yet; there's no rush.
You can't claim Apple will inevitable act a certain way now that they're on Intel chips; you don't know that. They have no history of using Intel chips. Just because your bright minds think it would be a good idea to move the MB line to the latest and greatest chip whenever a new one is released by Intel because "that's what the other guys are doing," it doesn't mean Apple agrees with you.
What we DO know for a fact is Apple like to differentiate between consumer and pro lines, and Apple has never been one to put the latest chips into the iMac or Mac Mini level machines - and I don't see either of that changing.
bursty
Aug 7, 03:04 PM
I don't understand why people are complaining about the Bluetooth and wireless not being included. These are not portables, they won't move, and in many cases professionals don't care if the keyboard is wired or want it wired for some specific reason. Wireless internet is for portable computers folks, not a big hunk of aluminum that will sit on the floor or desk permanently. Wired is also still faster than wireless...if you are in a networked office environment that can make a massive difference.
My house is not wired for ethernet. Which means, I would have to snake a wire through 3 floors, drill holes in the ceiling, etc etc. Its sooo much easier just to have airport. I have 3meg internet service and I cannot tell a difference between wired and wifi. My wireless will hit ~10mb/s transfer if I'm moving a large file from one computer to another. Obviously, that 10mb/s is faster then my 3meg internet service. My internet service is the bottleneck, not the wireless. Therefore....no difference in speed.
Second, I have BT keyboard, mouse, and phone. I use BT all the time. Sure, I can just order the option. However, that means I cant just run to my local apple store and pick up a Mac Pro. Its absolute crap that a ~$600 Macmini has these options standard, and yet Apples $4000 top of the line machine doesnt. Unacceptable.
My house is not wired for ethernet. Which means, I would have to snake a wire through 3 floors, drill holes in the ceiling, etc etc. Its sooo much easier just to have airport. I have 3meg internet service and I cannot tell a difference between wired and wifi. My wireless will hit ~10mb/s transfer if I'm moving a large file from one computer to another. Obviously, that 10mb/s is faster then my 3meg internet service. My internet service is the bottleneck, not the wireless. Therefore....no difference in speed.
Second, I have BT keyboard, mouse, and phone. I use BT all the time. Sure, I can just order the option. However, that means I cant just run to my local apple store and pick up a Mac Pro. Its absolute crap that a ~$600 Macmini has these options standard, and yet Apples $4000 top of the line machine doesnt. Unacceptable.
macdouche
May 6, 08:12 AM
So I just bought a new 4 core Sandy Bridge iMac tonight and now this news breaks. Is ARM actually building anything in any way shape or form that competes with the Intel X86 stuff right now or is this just vaporware at this point?
Yeap, your new iMac is now obsolete, and I'm sure you were planning on doing so much with it. LMAO:D
Yeap, your new iMac is now obsolete, and I'm sure you were planning on doing so much with it. LMAO:D
nidserz
Apr 10, 02:14 AM
You didn't enter it properly then...
Here
280594
The thing about this question is, whats the point of the parentheses..
Here
280594
The thing about this question is, whats the point of the parentheses..
whatever
Aug 7, 04:23 PM
Thats a little better, but what about having a single processor $1500 model like they used to do with the G4s? If Apple really wants to build their market share, they have to realize that people often buy PCs because they can be customized and some of those people don't want $2500 computers. Not having a customizable model in the desktop lineup that is under $2000 is a bad idea.
One of the big complaints I hear about Dell from my friends in IT that buy computers for our company (10,000+ employees) is that Dell has to many product lines and to many options. All with prices and specs that change daily.
Are you forgetting that you can buy a Mac for as low as $599.00 and it's customizable too!
People who are buying Mac Pros are not the casual shopper, who walks into an Apple store to look at the latest iPods and walk out with a computer (those people buy iMacs).
One of the big complaints I hear about Dell from my friends in IT that buy computers for our company (10,000+ employees) is that Dell has to many product lines and to many options. All with prices and specs that change daily.
Are you forgetting that you can buy a Mac for as low as $599.00 and it's customizable too!
People who are buying Mac Pros are not the casual shopper, who walks into an Apple store to look at the latest iPods and walk out with a computer (those people buy iMacs).
ssk2
Apr 18, 03:40 PM
Show me something that works as well BEFORE Apple demoed the iPhone.
Technology =/= usability.
If you hate Apple then why are you doing here?
You can't protect (or indeed measure) 'usability'.
People come here because we use, have problems with, or are considering buying Apple products. Not all of us are absolutely crazy in love for for anything that Jobs has touched.
Technology =/= usability.
If you hate Apple then why are you doing here?
You can't protect (or indeed measure) 'usability'.
People come here because we use, have problems with, or are considering buying Apple products. Not all of us are absolutely crazy in love for for anything that Jobs has touched.
No comments:
Post a Comment